ABS+Mainstream
Advanced
Enclosure Required
Dryer Recommended
eSUN ABS+
Modified ABS with reduced warping and better layer adhesion. The ABS+ to start with if you're new to ABS.
Nozzle Temp
235-260°C
Bed Temp
95-110°C
Max Speed
60 mm/s
Tolerance
±0.03mm
Material
ABS+
Diameter
1.75mm
Density
1.04 g/cm³
Difficulty
Advanced
Best For
Budget ABS users, functional prototypes
Typical price
~$24/kg
Full Specifications
| Material | |
| Type | ABS+ |
| Brand | eSUN |
| Density | 1.04 g/cm³ |
| Diameter | 1.75mm |
| Tolerance | ±0.03mm |
| Temperatures | |
| Nozzle Min | 235°C |
| Nozzle Max | 260°C |
| Bed Min | 95°C |
| Bed Max | 110°C |
| Printing | |
| Max Speed | 60 mm/s |
| Enclosure | Required |
| Dryer | Recommended |
| Difficulty | Advanced |
| Ratings | |
| Ease of Printing | 3/5 |
| Strength | 5/5 |
| Commercial | |
| Typical price (USD/kg) | ~$24 as of Apr 2026 |
| Best For | Budget ABS users, functional prototypes |
Features
What's Good, What Isn't
Pros
- Less warping than regular ABS
- Cheap
- Tough parts
Cons
- Still needs enclosure
- Fumes
Recommended Starting Settings
Nozzle
247.5°C
Range: 235-260°C
Bed
102.5°C
Range: 95-110°C
Speed
60 mm/s
Max tested
Fan
0-20%
Starting point
These are starting points. Dial in retraction, pressure advance, and flow rate for your specific printer. A temp tower is your friend.