PLAMainstream
Beginner
Overture PLA
Budget PLA that punches above its price — tighter tolerance than Hatchbox and comes with a clean-wound spool.
Nozzle Temp
190-220°C
Bed Temp
50-60°C
Max Speed
100 mm/s
Tolerance
±0.03mm
Material
PLA
Diameter
1.75mm
Density
1.24 g/cm³
Difficulty
Beginner
Best For
First-time buyers, functional prototypes
Typical price
~$20/kg
Full Specifications
| Material | |
| Type | PLA |
| Brand | Overture |
| Density | 1.24 g/cm³ |
| Diameter | 1.75mm |
| Tolerance | ±0.03mm |
| Temperatures | |
| Nozzle Min | 190°C |
| Nozzle Max | 220°C |
| Bed Min | 50°C |
| Bed Max | 60°C |
| Printing | |
| Max Speed | 100 mm/s |
| Enclosure | Not required |
| Dryer | Not needed |
| Difficulty | Beginner |
| Ratings | |
| Ease of Printing | 5/5 |
| Strength | 3/5 |
| Commercial | |
| Typical price (USD/kg) | ~$20 as of Apr 2026 |
| Best For | First-time buyers, functional prototypes |
Features
What's Good, What Isn't
Pros
- Consistent tolerance
- Good price-to-quality ratio
- No tangling
Cons
- Lower max speed than premium brands
Recommended Starting Settings
Nozzle
205°C
Range: 190-220°C
Bed
55°C
Range: 50-60°C
Speed
100 mm/s
Max tested
Fan
100%
Starting point
These are starting points. Dial in retraction, pressure advance, and flow rate for your specific printer. A temp tower is your friend.
Printers That Run Overture PLA Well
Filtered to FDM printers in our database rated Good or better for PLA. Cheaper options listed first within each rating tier.
