RESINMainstream
Intermediate
Anycubic Photon Mono M7
10.1" 14K monochrome screen with LighTurbo for ultra-uniform exposure. Sharp 17µm pixels for serious miniature detail.
Build Volume
223.78×126.97×230mm
LCD
10.1 inch mono
Resolution
14K (13312 x 5120)
XY
17µm
Type
RESIN
Released
2024-05
Light Source
Anycubic LighTurbo (matrix LED)
Z-Axis
Single linear rail
Leveling
Manual (4-screw)
Best For
Detail-painting miniatures, jewelry …
Typical price
~$269
Full Specifications
| Build | |
| Build Volume | 223.78 × 126.97 × 230 mm |
| LCD Size | 10.1 inch mono |
| LCD Resolution | 14K (13312 x 5120) |
| Resolution | |
| XY Resolution | 17 µm |
| Z Resolution | 10 µm |
| Min Layer Height | 10 µm |
| Exposure Time | 2s (typical) |
| Hardware | |
| Light Source | Anycubic LighTurbo (matrix LED) |
| Release Film | Improved ACF Film |
| Z-Axis | Single linear rail |
| Leveling | Manual (4-screw) |
| System | |
| Connectivity | Wi-Fi, USB |
| Assembly | Fully assembled |
| Ratings | |
| Ease of Use | 4/5 |
| Print Quality | 5/5 |
| Value | 4/5 |
| Commercial | |
| Released | 2024-05 |
| Typical price (USD) | ~$269 as of Apr 2026 |
| Best For | Detail-painting miniatures, jewelry prototypes, anyone wanting 14K resolution |
Material Compatibility
How well this printer handles common materials. Ratings reflect stock hardware — upgrades like all-metal hotends or hardened nozzles can push these higher.
ABS-like Resin
Flexible Resin
Standard Resin
Tough Resin
Water Washable
Perfect — runs out of the box
Great — minimal tuning
Good — works with care
Limited — possible with mods
Not supported
What's Good, What Isn't
Pros
- 14K resolution — 17µm pixels rival the best at this price
- LighTurbo gives exceptionally even exposure
- Anycubic slicer is mature and stable
Cons
- Manual leveling — it's 2026, this should be auto
- Plate is smaller than the Saturn 4 Ultra (10.1" vs 10")
- No release sensor or intelligent print monitoring